How To Attach Ledger Board To House For Patio Cover

ledger boards are attached to the house to provide a solid surface for attaching a patio cover. ledger boards should be attached to the house at each corner of the patio cover and along the sides of the cover. the ledger board should be level and square with the house.

How To Attach Ledger Board To House For Patio Cover

There is no one definitive answer to this question. Some people might use screws or nails to attach the ledger board to the house, while others might use metal brackets or connectors. It all depends on the materials you have available and the specific situation you are dealing with. Make sure to use a level when attaching the ledger board, so that your patio cover is level and looks professional.

-Ledger board -Screws -Drill -Circular saw -Chisel – Hammer -Tape measure -Paint or Stain -Plywood (1/2 inch 4’x8′)

  • Attach ledger board to house with screws
  • Install joists onto ledger board install roofing material
  • Measure and mark ledger board location on house
  • Drill holes in ledger board

– ledger board should be attached to house perpendicular to rafters – use galvanized lag screws or heavy-duty metal framing anchors to attach ledger board to house – use a level to ensure ledger board is level – use a tape measure to ensure ledger board is the correct length


Frequently Asked Questions

How Do You Attach A Ledger Board To A House?

A ledger board is a board that is attached to the side of a house to provide a surface for attaching roof rafters. The ledger board is usually made from treated lumber and is attached to the house with lag screws or bolts.

How Do You Attach A Ledger Board To A Sill Plate?

The ledger board is attached to the sill plate with screws or nails.

How Do You Hang Ledger?

There are many ways to hang ledger. One way is to use a ledger hanger. The ledger hanger has a hole in the top so you can put the hanger over the stud. You then use a drill to make a hole in the ledger. The hanger goes through the hole in the ledger and into the hole in the wall. You then use a screw to attach the hanger to the wall.


In Closing

To attach ledger board to a house for a patio cover, use screws to fasten the ledger board to the house at least every 16 inches. Make sure that the ledger board is level and that it is attached to solid wood on the house.

Leave a Comment

Your email address will not be published. Required fields are marked *