How To Bend Composite Deck Boards

Bending composite deck boards is a relatively easy process that can be done with a few simple tools. In order to bend the boards, you will need a heat gun, a clamp, and a straight edge. First, use the heat gun to heat up the board to the desired curve. Once the board is hot, use the clamp to hold it in place and use the straight edge to help shape the curve. Hold the board in place until it cools down and hardens.

How To Bend Composite Deck Boards

There are a few ways that you can bend composite deck boards. One way is to heat the board until it is pliable and then use a bending form to hold the board in place while it cools. Another way is to use a vacuum bag. This method involves attaching the board to a bag that has been evacuated of air. The lack of pressure inside the bag will cause the board to conform to any shape that you desire.

– Composite deck boards – A workbench – Saw – Hammer – Drill – Jigsaw

  • The first step is to measure and mark the boards to be bent
  • Next, use a jigsaw to cut out the desired shape
  • Finally, use a heat gun or a propane torch to heat up

The first step is to measure and mark the board where you want it to bend. You will then need to use a heat gun to heat up the area that you marked. Once the area is hot enough, you can use a pipe or a dowel to bend the board.


Frequently Asked Questions

How Do You Curve A Composite Deck?

The easiest way to curve a composite deck is to use a curved saw blade. You can also use a jigsaw, but it will be more difficult.

Can You Bend Composite Decking Boards?

It is possible to bend composite decking boards, but it is not recommended. Composite decking is designed to be a strong, durable material, and bending can damage the board and lead to cracking or breaking.

Can You Bend Composite Decking With Heat Gun?

It is possible to bend composite decking with a heat gun, but it is not recommended. The heat can cause the material to warp or even catch on fire.


In Closing

Composite decking boards can be easily bent by using a heat gun. First, start by heating up the area where you will be bending the board. Once the board is hot enough, use a pair of pliers to bend the board in the desired shape.

Leave a Comment

Your email address will not be published.