How To Cap Fridge Water Line

Refrigerators with water and ice dispensers in the door have a water line that runs from the back of the refrigerator to the front. This water line can be capped off if you do not want to use the water and ice dispenser. To cap the fridge water line, you will need a screwdriver, a wrench and a hose clamp.

How To Cap Fridge Water Line

There are various ways to cap a fridge water line. One way is to purchase a water line cap from a hardware store or home improvement center. This type of cap is typically made from plastic or metal and screws onto the end of the water line. Another option is to use a hose clamp. A hose clamp is a metal band that wraps around the water line and secures with a screw. Finally, some people simply use electrical tape to seal the water line.

-Tools: Phillips head screwdriver, adjustable wrench, Teflon tape -Material: Fridge water line, cap

  • Shut off fridge power
  • Turn off water supply to fridge
  • Remove screws from bottom front of fridge
  • Lift off front panel of fridge look for water line connection on back of fridge and unscrew cut water

-How to cap fridge water line -Make sure the water is turned off at the source. -Locate the shut-off valve for the fridge water line. This is usually a small valve located on the underside of the fridge near where the water line enters. -Open the valve and disconnect the fridge water line from the faucet. -Thread the cap onto the end of the fridge water line and tighten it by hand. –


Frequently Asked Questions

Is It Ok To Turn Off Water To Refrigerator?

It is not OK to turn off the water to the refrigerator because it can cause the refrigerator to stop working.

What Happens If You Turn Off Water To Ice Maker?

Most likely the ice maker will not produce ice if the water supply is turned off.

Is It Okay To Turn Off Water Line To Fridge?

Yes, it is okay to turn off the water line to the fridge. Turning off the water line will not damage the fridge and will save you money on your water bill.


Wrap-Up

If you are using a fridge with a water and ice dispenser in the door, it is important to cap the water line. This will keep contaminants from getting into your drinking water and will help keep your fridge running efficiently. To cap the water line, simply screw on a fitting cap to the end of the line. Make sure the cap is tight so that no water can escape.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *