How To Clean An Azek Deck

There is no one-size-fits-all answer to this question, as the best way to clean an azek deck may vary depending on the type of dirt or stain that needs to be removed. However, a few general tips for cleaning azek decks include using a soft bristle brush and a mild detergent or soap, rinsing thoroughly with water, and allowing the deck to dry completely before using it again.

How To Clean An Azek Deck

Azek decking is made from a PVC-based composite and is virtually maintenance-free. However, to keep your deck looking its best, you may need to clean it once or twice a year using a mild detergent and a garden hose. Start by sweeping away any debris on the surface of the deck. Mix a solution of one part dish soap to nine parts water in a bucket. Using a soft bristle brush, scrub the deck with the solution, working in small sections.

To clean an Azek deck, you will need a bucket, a soft bristle brush, a hose with a spray nozzle, and a wood cleaner. Make sure to read the instructions on the cleaner thoroughly before use. Wet the deck and then apply the cleaner to a small area. Use the brush to scrub the area and then rinse with the hose. Repeat this process until the entire deck is clean.

  • If needed, use a cleaner formulated for wood decks (follow
  • Sweep deck with broom to remove any debris or leaves
  • Vacuum/sweep again with a stiff brush to remove any remaining dirt or dust

Azek decks are made from a PVC-based composite that is designed to be low-maintenance. To clean an Azek deck, you will need a bucket, warm water, a mild detergent, a scrub brush, and a hose. Begin by mixing the detergent with the water in the bucket. Dip the brush into the mixture and scrub the deck clean. Rinse the deck with the hose when you are finished.


Frequently Asked Questions

Can I Use Vinegar On Azek Decking?

Yes, vinegar can be used on AZEK decking; however, it is not necessary. AZEK decks are low-maintenance and do not require any special care or treatments.

How Do You Restore Azek Decking?

There are a few ways to restore AZEK decking. One way is to use a Restore Deck Cleaner and Brightener kit. This will clean and brighten the decking. Another way is to use a power washer.

How Do You Restore Faded Composite Decking?

There are a few ways to restore faded composite decking, but the most common is to use a wood bleach. First, sweep or vacuum the deck to remove any debris. Next, mix the bleach according to the instructions and apply it to the deck using a pump-up sprayer. Let the bleach sit for 10-15 minutes and then rinse it off with a hose. Finally, seal the deck with a wood sealant.


To Review

To clean an azek deck, start by sweeping the surface and removing any large debris. Next, mix a solution of one part household bleach to nine parts water, and use a sponge or rag to apply it to the deck. Let the solution sit for 10-15 minutes, then rinse it off with a hose. Finally, allow the deck to dry completely before using it.

Leave a Comment

Your email address will not be published.