How To Connect Pvc To Brass Valve

PVC is a plastic pipe used for transporting water, gas, and other liquids. It is typically white in color and has a smooth interior surface that does not corrode over time. Brass valves are fittings used to connect two pieces of piping together. They are typically made of brass, a type of metal that is resistant to corrosion.

How To Connect Pvc To Brass Valve

The most common method of connecting PVC to a brass valve is to use a threaded adapter. The adapter will have male threads on one end that will screw into the valve, and female threads on the other end that will screw onto the PVC pipe. Another way to connect PVC to brass is to use a union. A union has three pieces – two threaded adapters and a hex-shaped piece in the middle. The adapters will screw onto the valve and PVC pipe, and the hex-shaped piece

-PVC piping -PVC cement -Brass valve -Teflon tape

  • Cut the pvc pipe to the desired length
  • Dry fit the pvc pipe to the valve to make sure it fits snugly
  • Apply pvc primer to the
  • Using a pvc cutter, cut the pipe square and cleanly

-Check the size of the pipe O.D. to make sure it matches the valve inlet -Cut the pipe to the correct length using a pipe cutter -Clean and deburr the pipe end with a file or emery cloth -Apply primer to the pipe end -Apply PVC cement to the pipe end and valve outlet


Frequently Asked Questions

How Do You Connect Threaded Pvc To Brass Valve?

To connect threaded PVC to brass valve, one would need to use a T adapter. The T adapter would have a threaded connection on one side to attach to the PVC pipe, and a threaded connection on the other side to attach to the brass valve.

How Do You Seal Brass To Pvc?

The most common way to seal brass fittings to PVC is with a solvent-based adhesive. PVC cement is applied to the outside of the fitting, then the brass fitting is pushed into place. The adhesive will form a seal between the two materials.

Do I Need Teflon Tape For Pvc To Brass?

No, you do not need Teflon tape for PVC to brass.


In Summary

To connect PVC to a brass valve, one must first cut the PVC pipe to the desired length. Then, a hole must be drilled in the pipe for the valve. Next, a fitting must be attached to the end of the pipe that will go into the valve. Finally, the valve must be attached to the fitting.

Leave a Comment

Your email address will not be published.