How To Cover Recessed Light Hole

There are many ways to cover a recessed light hole, but the most common is to use a trim. You can find trim at most hardware stores in a variety of materials, colors and styles.

How To Cover Recessed Light Hole

There are many ways to cover a recessed light hole. One way is to use a light diffusing material, like a frosted shower curtain or frosted window film. You can also use a decorative trim piece, like a crown molding or a simple frame. Another option is to use a plug in light fixture that fits into the recessed light hole.

-Tape measure -Pencil -Level -Circular saw -Plywood or other flat surface material -Ruler or straight edge -Stiles (1″x4″ lumber) -Cordless drill/driver -1 1/4″ hole saw -Paint or wood finish (optional)

  • Screw in light bulb pull up cloth
  • Cover hole with piece of cloth
  • Turn off light

-If the hole is less than 3 inches in diameter, use a recessed light cover. -If the hole is greater than 3 inches in diameter, use a recessed light trim kit. -If you are using a trim kit, make sure that the kit fits the size of your light fixture.


Frequently Asked Questions

How Do You Fill An Old Spot Light Hole?

There are a few ways to fix an old spotlight hole. You could try patching it with putty or wood filler, or using a metal patch made for this specific purpose. If the hole is too large, you may need to replace the entire light fixture.

Can You Cover Up Recessed Lighting?

Yes, you can cover up recessed lighting by using a decorative trim or panel.

How Do I Fill A Ceiling Light Hole?

If you have a ceiling light hole that is just a socket and no fixture, you can buy a light kit at any hardware store. It will have everything you need, including the instructions. If the hole is bigger than the light kit, you will need to get a trim kit as well. This is usually a ring that goes around the edges of the hole to make it smaller.


In Summary

Recessed light holes can be easily covered with a piece of trim or molding. First, measure the size of the hole and then purchase a piece of trim or molding that is slightly larger. Cut the trim or molding to size and then press it into the hole. If the hole is too large, use a caulk or adhesive to secure the trim or molding in place.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *