How To Cover Tub Surround Flange

If you are remodeling your bathroom, you may need to cover the tub surround flange. This is a simple process that can be done with a few materials that you may have around your home.

How To Cover Tub Surround Flange

When installing a tub surround, the flange that goes around the top of the tub is often left exposed. This can be an eye sore, but there are ways to cover it up. One way is to use a piece of moulding or trim that can be painted to match the surrounding wall. Another option is to use a cover strip, which is a thin piece of moulding or trim that snaps into place over the flange.

-Tape measure -Paint brush or roller -Paint of your choice -Primer (optional) -Paint tray or bucket -Rag -Sandpaper (optional)

  • Clean the tub and surround with a mild detergent
  • Measure the flange and cut a piece of fiberglass mesh to fit. staple the mesh to the back
  • Rinse well and allow to dry

below -Measure the width of the tub surround flange. -Purchase trim that is at least as wide as the tub surround flange and cut it to fit. -If necessary, use a miter saw to make 45 degree cuts on each end of the trim. -Apply construction adhesive to the back of the trim and press it in place against the tub surround flange. -Use a drill with a 5/32″ bit to make pilot holes in the trim

Frequently Asked Questions

How Do You Cover A Tub Flange?

One way to cover a tub flange is to use a silicone caulk.

Should Backer Board Go Over Tub Flange?

It is not necessary to put backer board over the tub flange, but it can be helpful in preventing water damage to the wall. If you are using tile on the wall, it is important to use a thinset mortar that will adhere to both the backer board and the tub flange.

How Do You Cover A Shower Flange?

The shower flange is the part of the shower that the shower curtain hangs from. It is usually a metal ring with screws that attach it to the wall. There are various ways to cover it. One way is to use a shower curtain liner that has a built-in flap or skirt that covers the flange. Another way is to use a decorative band of fabric or wallpaper that covers the flange.

In Closing

There is no one definitive way to cover the tub surround flange. Some possible methods include using a construction adhesive, silicone caulk, or tile adhesive.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *