How To Cut A Cast Iron Tub

There are a few ways to cut a cast iron tub. The easiest way is to use a reciprocating saw with a demolition blade. Another way is to use a chisel and hammer to chip away at the tub. The last way is to use a grinder with a cutting wheel.

How To Cut A Cast Iron Tub

Cast iron tubs are often difficult to cut, as they are very heavy and may contain hazardous materials. However, there are a few ways to cut them. One way is to use a reciprocating saw fitted with a demolition blade. Another way is to use a chainsaw.

-Tape measure -Chisel -Pry bar -Hammer -Safety glasses -Dust mask -Cast iron tub

  • Using a drill, make a hole in the tub near one end
  • Drill another hole in the tub near the other end cut the tub using a
  • Cut the tub using a cutoff wheel on an angle grinder

– Choose an appropriate location in which to cut the tub. – Wear protective gear, such as gloves, goggles and a dust mask. – Mark the cutting line with a marker or tape. – Cut the tub using a saw.


Frequently Asked Questions

Can You Break A Cast Iron Tub Into Pieces?

It is possible to break a cast iron tub into pieces, but it is not an easy task. Cast iron is a very durable material and can be difficult to break without the use of special tools.

What Is The Best Way To Cut A Cast Iron Tub?

There is no one “best” way to cut a cast iron tub. Some methods that could be used include sawing, chiseling, and using a blowtorch.

What Is The Best Way To Cut Cast Iron?

There is no definitive answer, as there are a few ways to go about it. Some people might prefer using a hacksaw, while others might use a grinder.


To Summarize

Cast iron tubs are heavy and difficult to cut. It is best to use a reciprocating saw with a metal-cutting blade. The saw should be set to its lowest speed and used slowly to avoid shattering the tub.

Leave a Comment

Your email address will not be published.