How To Cut Asphalt Driveway

Cutting asphalt driveway is a very important task that should be done with utmost care. It is necessary to cut the asphalt driveway in order to create a smooth and even surface before paving it. The following are the steps involved in cutting an asphalt driveway: 1. Mark the area where you want to cut the asphalt driveway using spray paint or stakes and string. 2. Drill pilot holes in the marked area using a hammer drill and 1/4 inch bit. 3

How To Cut Asphalt Driveway

There is no one-size-fits-all answer to this question, as the best way to cut an asphalt driveway will vary depending on the specific circumstances. However, some tips on how to cut asphalt driveway include using a circular saw or power mower with a sharp blade, being careful not to overheat the blade, and keeping the blade parallel to the driveway surface.

-a heavy duty shovel -a sturdy broom -a wheelbarrow -a pickaxe -a hacksaw -a large bucket -asphalt sealant

  • Put on gloves, a dust mask, and safety goggles
  • Cut into the asphalt with
  • Cut along the edge of the driveway with a circular saw
  • Park the car in the driveway and pull the emergency brake

1. Check the edges of the driveway to see if they are even. 2. Use a straight edge to ensure that the cuts are even. 3. Decide how deep you want to cut the asphalt. 4. Use a circular saw to cut the asphalt. 5. Wear safety glasses and protective clothing when cutting the asphalt.

Frequently Asked Questions

What Saw Blade Will Cut Asphalt?

There is no definitive answer to this question as it depends on the type of saw blade being used and the specific asphalt surface being cut. However, in general a diamond blade is most likely to be able to cut asphalt, although a standard metal blade may also be effective.

Should You Use Water When Cutting Asphalt?

Water should not be used when cutting asphalt as it can cause the asphalt to soften and become slick.

What Is A Asphalt Saw?

An asphalt saw is a construction tool that is used to cut through asphalt. It typically has a diamond-tipped blade that can quickly and easily slice through the material.


In order to cut an asphalt driveway, one must use a saw that is specifically designed to cut asphalt. The saw can be rented from a local home improvement store. First, mark the area where the cut is to be made with spray paint or flags. Then, set the saw blade depth so that it will cut through the asphalt but not into the underlying concrete. Turn on the saw and slowly move it along the marked line. Apply pressure evenly as you move the saw. If necessary, stop in the middle of the cut and restart so that you don’t gouge the asphalt.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *