How To Dig Under A Sidewalk

There are many reasons why someone might want to dig under a sidewalk. Maybe they need to get to a utility line or cable, or maybe there’s something they need to bury underground. Whatever the reason, it’s not as difficult as it may seem. Here is a simple guide on how to do it. First, you’ll need to figure out where the sidewalk is buried. This can usually be done by using a metal detector or by poking around with a rod until you hit

How To Dig Under A Sidewalk

There is no one definitive way to dig under a sidewalk. Some methods include using a shovel or pickaxe to break through the concrete, using a jackhammer to drill through the concrete, or using explosives to blast through the concrete.

-Shovel -Prying bar -Wheelbarrow -Bricks or concrete blocks -Cement mixer -Tamper

  • Use a shovel to dig at the mark
  • If you hit something solid, use a pry bar to break through it dig until you reach the other side
  • Look for the utility mark

-The first step is to figure out where the sidewalk is buried. -Once the location is found, use a shovel to dig a trench that is two feet wide and two feet deep. -Then, use a crowbar to pry up the concrete slab. -Be careful not to damage the pipes or wires that may be buried underneath.


Frequently Asked Questions

How Do You Bore Under A Sidewalk With A Pressure Washer?

The process of boring under a sidewalk with a pressure washer is done by using a wand to direct the high-pressure water at the surface of the concrete. The water will begin to erode the surface and create a hole that can be then used to insert a pipe or other object.

What Kind Of Tool Do I Need To Dig A Trench Under A Sidewalk?

There are a few different types of tools that could be used to dig a trench under a sidewalk, including shovels, picks, and hoes.

How Do You Tunnel Under A Sidewalk?

One way to tunnel under a sidewalk is to use a pipe to create a space large enough for a person or small equipment to pass through. The pipe can be filled with soil and/or concrete to support the weight of the sidewalk and those walking on it.


In Closing

To dig under a sidewalk, one would need to first figure out where the sewer lines and water pipes are. Once those are located, one can start digging a trench that is wide and deep enough to fit the desired infrastructure. The trench should be sloped slightly towards the street in order to ensure proper drainage.

Leave a Comment

Your email address will not be published.