How To Find Rafters Under Shingles

There is no one definitive way to find rafters under shingles. Some methods include using a metal detector, probing with a stick or pole, or using a moisture meter.

How To Find Rafters Under Shingles

The first step is to locate the rafters. You can do this by looking in the attic for the areas of the roof that are parallel to the walls of the house. Once you have located the rafters, you can then find the shingles that are covering them by looking on the roof. If you are having trouble finding the shingles, you can try walking on the roof and see if you can feel any bumps.

A hammer, a utility knife, and a roofing square.

• If there is any damage, use a level to find the high spot and make a mark
• Check the ridge of the roof for any damage that may have been caused by a rafter
• Measure down from the ridge

-Check if the roof needs to be replaced: -If there are missing or broken shingles, or the roof is leaking, then it needs to be replaced. -If the roof is in good condition, then you will need to remove a section of the shingles to check for rafters. -Use a pry bar to lift up a corner of a shingle and look underneath. If you see rafters, then you can nail a

Frequently Asked Questions

How Do You Find Rafters Under Fascia?

There are a few ways to find rafters under fascia. One way is to use a stud finder. Another way is to bang on the fascia and listen for a hollow sound, which would indicate that there is a rafter underneath.

Where Are Roof Rafters Located?

The rafters are located on the roof, between the top of the wall and the roofing material. They are typically made of wood or metal, and support the roofing material and insulation.

What Is A Fascia Rafter?

A fascia rafter is a type of roof rafter that is used to attach the fascia board to the roof of a building.

In Summary

There are a few methods that can be used to find rafters under shingles. One method is to use a stethoscope to listen for the sound of nails being driven. Another method is to use a thermal camera to look for the heat loss from the rafters.