How To Find Studs Behind Hardiplank

Studs are the vertical members that support the wallboard in a wall. They are typically spaced 16 inches on center, but sometimes they are 24 inches on center. In order to find the studs behind hardiplank, one can use a stud finder or a screwdriver. First, locate the electrical outlets in the wall. Then, use a stud finder to find the location of the studs. If there is no stud finder available, one can use

How To Find Studs Behind Hardiplank

There are a few ways to find studs behind hardiplank. One is to use a stud finder. Another is to tap on the hardiplank and listen for a different sound than when tapping on the wall behind it. A third way is to drill a small hole in the hardiplank and look for screws or nails that are sticking out from the wallboard behind it.

-Stud finder -Tape measure -Pencil -level -Hammer -Nail gun or nails -Chisel -Hardiplank screws

  • Use a drill to make a small hole in the hardiplank at each mark
  • Mark the approximate location of each stud with a pencil
  • Insert a screw
  • Use a stud finder to locate studs in the wall

-Check for electrical cables or wires behind the hardiplank by probing with a screwdriver or metal rod. If you hit something solid, that is likely a stud. -If there are no wires present, use a stud finder to locate the studs. Slide the tool along the surface of the hardiplank until it beeps or lights up, indicating that it has found a stud. Mark the spot with a pencil and then drill your screws into the wall at that location


Frequently Asked Questions

How Do You Find Studs Under Siding?

There are a few ways to find studs under siding. One way is to use a stud finder. Another way is to tap on the siding and listen for a hollow sound, which would indicate that there is a stud behind it. Another way is to use a knife to cut a small hole in the siding and look for the screws or nails that are holding it in place; these would indicate the location of the studs.

How Do You Find Studs Behind Siding?

The easiest way to find studs behind siding is to use a stud finder.

Does A Stud Finder Work Through Siding?

Yes, a stud finder works through siding. It will detect the presence of a stud even if there is a layer of material between the tool and the target.


Taking Everything Into Account

There are a few different ways to find studs behind hardiplank. One is to use a stud finder, another is to tap on the hardiplank and listen for a difference in sound, and another is to use a magnet.

Leave a Comment

Your email address will not be published. Required fields are marked *