How To Finish Laminate At Top Of Stairs

There are a few ways to finish the top of stairs when you have laminate flooring. You can use a stair nosing, which is a piece of trim that goes along the edge of the stairs and covers the gap between the floor and the stairs. You can also use a stair cap, which is a piece of trim that goes over the edge of the stairs and covers the gap between the floor and the wall. Another option is to use a stair runner, which is a piece

How To Finish Laminate At Top Of Stairs

There are a few ways to finish laminate at the top of stairs. One way is to use a stair nose molding. This is a molding that is specifically designed to be used at the top of stairs. It has a curved edge that fits against the step, and it can be attached with adhesive or nails. Another option is to use a trim piece that is designed to be used around doorways. This trim piece has an edge that fits against the wall and a lip that

-Stairs -Laminate -Circular saw -Ruler or tape measure -Plywood -Paint or sealant -Paintbrush or sealant brush -Jigsaw -Safety goggles -Dust mask

  • Use a router with a laminate trimming bit to trim
  • Stick the laminate to the top of the stairs using construction adhesive or contact cement
  • Cut your laminate to size
  • Measure the width of your stairs

-Measure the height of the stairs and purchase enough laminate to cover them. -Cut the laminate to size with a straight edge and a sharp blade. -Apply contact cement to both the top of the stairs and to the back of the laminate. -Allow the adhesive to dry for 30 minutes. -Carefully place the laminate over the stairs, making sure it is aligned correctly. -Use a rolling pin or a rubber mallet


Frequently Asked Questions

How Do You Finish Top Stair Treads?

There are a few ways to finish the top stair treads – one is to use a bullnose trim, which is a round or square piece of wood that is glued to the edge of the tread. Another option is to use a cap molding, which is a rectangular piece of wood that is also glued to the edge of the tread.

What Kind Of Finish Do You Put On Stair Treads?

There are many types of finishes that can be put on stair treads. A common finish is a coat of sealant or varnish to protect the wood from moisture and dirt. Another option is to have the treads painted with a non-slip paint to improve safety.

How Do You Finish Stair Treads So They Are Not Slippery?

There are a few ways to finish stair treads so that they are not slippery. One way is to use a non-slip coating or treatment on the surface of the tread. Another way is to add grit or sand to the surface of the tread.


In Summary

There is no one definitive way to finish laminate at the top of stairs. However, there are some general tips that can be followed in order to achieve a professional-looking finish. First, it is important to make sure that the surface is smooth and even before starting the installation process. Additionally, it is often helpful to use a trim or edge banding to cover the seams between the stair tread and the flooring. Finally, be sure to use a high-quality adhesive in order to ensure a secure and lasting bond between the flooring and the stairs.

Leave a Comment

Your email address will not be published.