How To Finish The Ends Of Composite Decking

Finishing the ends of composite decking is a necessary step to protect the decking from weather and insects. There are a few ways to finish the ends of composite decking, but the most common is to use a piece of trim or fascia. The trim or fascia should be cut to length and nailed in place.

How To Finish The Ends Of Composite Decking

There are a few ways to finish the ends of composite decking. One way is to use a metal connector called a joist hanger. The hanger is screwed into the ends of the decking and the joist is then attached to the hanger. Another way to finish the ends of composite decking is to cut the boards to length and then use a wood end cap. The end caps are glued or nailed to the ends of the boards.

-Hammer -Pry bar -Chisel -Circular saw -Jigsaw -Drill -1 inch hole saw – composite decking

• If needed, use a sealant to protect the end of the decking
• Use a file or sandpaper to smooth out the cut
• Use a saw to cut the composite decking even with the edge of the joist

-If the decking is being installed over a solid surface, such as concrete, use a hammer drill with a masonry bit to make the hole for the anchor. -Clean and dry the surface where the decking will be installed. -Apply a construction adhesive to the back of the decking and to the surface where it will be installed. -Push the decking into place and attach it with DeckLoks or screws. -If using screws, drive them

Frequently Asked Questions

How Do You Finish Decking Edges?

To finish the edge of decking, use a saw to cut the decking to the desired length. Use a router with a rounding bit to create a smooth, finished edge.

Can You Paint The Ends Of Composite Decking?

Yes, you can paint the ends of composite decking. However, it is not recommended, as the paint may chip or flake off over time.

How Do You Hide The Ends Of A Composite Deck?

To hide the ends of a composite deck, you can use either a fascia or end cap. A fascia is a board that is attached to the edge of the deck and covers the end of the deck boards. An end cap is a piece of trim that is attached to the end of the deck boards and covers the edge of the fascia.

Taking Everything Into Account

To finish the ends of composite decking, cut the boards to fit and use a wood adhesive to adhere them to the deck. Seal the end seams with a sealant.