How To Fix Water Ponding On Concrete

One common problem with concrete is water ponding. When the surface of a concrete driveway, patio, or sidewalk becomes wet, the water will not dissipate and will instead sit on the surface. This can lead to a number of problems, including a slippery surface when it rains, deterioration of the concrete, and mosquito breeding grounds. There are several ways to fix water ponding on concrete. One is to install a drain system beneath the concrete. This can be done by drilling small

How To Fix Water Ponding On Concrete

Water ponding on concrete is a common problem that can be solved through a variety of methods. One method is to install a drainage system on the concrete surface. This can be done by installing a perforated pipe beneath the concrete and then covering it with gravel. The gravel will help to keep the pipe open and allow the water to drain away. Another option is to install a rain garden near the concrete surface. This will help to collect the water and allow it to drain away naturally.

1. Shovel 2. Rake 3. Broom 4. Waterproof sealant 5. Concrete patching compound

  • Assess the soil type and drainage capabilities
  • Create a sloping surface to help water run off install a perimeter drain system
  • Determine the extent of the water ponding
  • Address any drainage issues

– ponding can be fixed by adding drainage features such as a french drain or a rain garden; – raising the grade of the concrete so that water flows away from it; and – installing a waterproofing membrane on the concrete.


Frequently Asked Questions

What Happens If Water Puddles On Concrete?

If water puddles on concrete, the water will eventually evaporate and the concrete will dry.

How Do You Drain A Low Spot On Concrete?

The most common way to drain a low spot on concrete is to install a catch basin and pipe system. The catch basin collects the water and then the pipe system directs it away from the area.

How Do You Drain A Low Spot?

There are a few ways to do this, depending on the size of the low spot and the type of soil. One way is to use a garden hose to slowly fill the low spot with water until it bubbles up through the surface. This means that the water is traveling through the soil and bringing up soil particles and air along with it. Once the bubbling stops, the water has reached the lowest point in the soil and can be drained away. Another way to drain a low spot is to use a shovel to remove some of the soil from around the edge of the low spot and then fill it with sand or gravel. This will help to create a trench around the low spot that will allow water to drain away.


To Summarize

There are a few ways to fix water ponding on concrete. One way is to install a drainage system that will remove the water from the surface. Another way is to use paving stones or other type of pavers to create a surface that will allow the water to drain through.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *