How To Install A Commercial Wall Hung Toilet

Installing a commercial wall hung toilet is a relatively simple process that can typically be completed in under an hour. The first step is to remove the old toilet and disconnect the water supply. The new toilet is then affixed to the wall with screws or bolts and the water supply is reconnected. The final step is to flush the toilet and check for any leaks.

How To Install A Commercial Wall Hung Toilet

Commercial wall hung toilets are ideal for use in restrooms where space is at a premium. They are easy to install and do not require any additional floor space. The first step in installing a commercial wall hung toilet is to remove the old toilet. Next, cut through the existing floor and attach the flange to the subfloor. The flange must be level in order for the toilet to sit properly on it. If your subfloor is made of concrete, you will need to

-a commercial wall hung toilet -a drill -a screwdriver -screws -a level -a tape measure -liquid nails

  • Remove the old toilet
  • Check that you have enough space for the toilet
  • Measure the rough
  • In for the new toilet install the flange for the new toilet install the drain pipe for the new toilet

-Commercial wall hung toilets are typically installed during the construction of a new building or remodel. -The toilet is typically hung on the wall with the flange and waste outlet facing the wall. -There are usually two bolts that come out of the bottom of the toilet and into a bracket on the wall for support. -The water supply and waste lines are then connected to the toilet. -The toilet seat and lid are then installed.

Frequently Asked Questions

How Do You Install A Commercial Toilet Flush?

You would install a commercial toilet flush by first shutting off the water supply to the toilet. You would then disconnect the old flush system and remove it. You would then install the new flush system and reconnect the water supply.

Can You Use A Wax Ring On A Wall Mount Toilet?

Yes, you can use a wax ring on a wall mount toilet. The wax ring creates a seal between the toilet and the floor, making it watertight.

How Are Wall Mounted Toilets Installed?

Wall mounted toilets are typically installed by a professional plumbing contractor. The toilet is mounted to the wall and connected to the plumbing line. The water supply and drainage lines are also connected.


Installing a commercial wall hung toilet is a relatively easy process, but it is important to follow the manufacturer’s instructions carefully. It is also important to make sure that the toilet is properly supported and secured to the wall.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *