How To Install A Hidden Piano Hinge

A hidden piano hinge is a type of hinge that is installed in such a way that it is not visible from the outside of the door. This type of hinge is often used on cabinet doors or other types of doors that need to be hidden from view.

How To Install A Hidden Piano Hinge

There are a few ways to install a hidden piano hinge. The first way is to use a coping saw to cut a notch in each end of the hinge, then use a chisel to fit the hinge into the notches. The second way is to use a jigsaw to cut out a rectangular hole in each end of the hinge, then use a hammer and chisel to fit the hinge into the hole. The third way is to use a drill to make pilot holes in each end

-Tape measure -Piano hinge -Drill -1 inch hole saw -Jigsaw -Circular saw -Ruler or a straight edge -Plywood -Wood screws -Construction adhesive -Cordless drill -1 inch Forstner bit -High density foam weather stripping -Paint or a sealant -Paint brush

  • Measure the width of the door and the thickness of the door
  • Insert one end of the hinge
  • Remove the old hinge from the door and door frame
  • Cut the piano hinge to size using a hacksaw or bolt cutter

-Secure the hinge to the door in the desired location. -Use a drill to make pilot holes in the door and hinge. -Insert screws into the pilot holes and secure the hinge to the door.


Frequently Asked Questions

Can A Piano Hinge Be Concealed?

Yes, a piano hinge can be concealed. One way to do this is to mount the hinge so that it is hidden behind the fallboard (keyboard cover). Another option is to use a “flap hinge” which is a type of hidden hinge that is designed to be used on flaps or panels that open and close like a door.

What Is A Concealed Hinge?

A concealed hinge is a type of hinge that is hidden from view when the door is closed. It is typically used on cabinet doors and other types of furniture that need to be opened and closed often.

Where Do You Put A Piano Hinge?

A piano hinge is a type of hinge that is often used on heavier doors. It is so-named because its design resembles that of the hinges on a piano.


To Summarize

Installing a hidden piano hinge is a relatively easy process that can be completed in a matter of minutes. First, remove the existing hinge from the door. Next, using a drill and hole saw, drill two holes in the door at the location where you want the hinge to be installed. Finally, insert the piano hinge into the holes and fasten it in place with screws.

Leave a Comment

Your email address will not be published.