How To Install Azek Decking

Azek Decking is a composite decking material made from a blend of PVC and wood fibers. It is marketed as a low-maintenance alternative to traditional wood decking.

How To Install Azek Decking

There are a few ways to install Azek decking: traditional wood screws, hidden deck clips with stainless steel screws, or Tiger Claw TC-G clips. The traditional wood screws are the least expensive option, but they are more visible than the hidden deck clips. The hidden deck clips are more expensive, but they create a cleaner look. The Tiger Claw TC-G clips are the most expensive option, but they are also the easiest and fastest to install.

-Circular saw -Tape measure -Paint roller -Paint tray -Paint brush -Stapler -Deck screws -Drill -1 inch hole saw -Cordless drill -Jigsaw – Hammer -Chisel -Pry bar -Safety glasses

  • Sweep or use a pressure washer to clean any debris or dirt
  • Consult local weather report to ensure that there is no rain in the forecast for at least the next 48 hours
  • Clean the deck surface
  • Check the weather

-Check the weather conditions before beginning the installation process to avoid potential problems. -Remove any existing decking and debris before installing the new decking. -Plan the layout of the decking before starting to install it. -Install the starter boards at the end of each row and then attach the following boards to them. -Make sure that all of the boards are flush with one another and use a level to check for unevenness. -Nail or screw the

Frequently Asked Questions

Does Azek Decking Expand And Contract?

AZEK decking is a composite material that does not expand or contract with changes in temperature or humidity.

Which Is Better Azek Or Trex Decking?

There is no definitive answer as both materials have their own advantages and disadvantages. AZEK decking is made from a combination of recycled plastic and wood fibers, so it is environmentally friendly. It is also more resistant to weather and insects than Trex decking. However, Trex decking is made from 100% recycled wood, so it is more environmentally friendly than AZEK decking.

How Much Space Should Be Between Azek Deck Boards?

The maximum recommended spacing between AZEK deck boards is 1/4 inch.


Installing Azek decking is a relatively simple process that can be completed in a weekend. The most important step is to ensure that the deck surface is level and solid before installing the decking. The decking can be attached to the surface with screws or nails, and it is recommended to use a hidden fastener system for a neater finish.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *