How To Install Geberit Wall Hung Toilet

A wall-hung toilet is a type of toilet that is attached to the wall directly behind it, rather than sitting on a pedestal. They are often found in small bathrooms where space is at a premium. Geberit is a company that makes wall-hung toilets and they have a variety of models to choose from. Installation can be a little tricky, so it is best to have someone who is familiar with the process do it for you.

How To Install Geberit Wall Hung Toilet

A wall hung toilet is a type of toilet that is attached to the wall instead of sitting on the floor. This can be an advantage because it takes up less space and can be easier to clean. However, it can also be more difficult to install than a traditional toilet. Here are some tips on how to install a geberit wall hung toilet: 1. Find a location for the toilet. The toilet should be installed in an area that is accessible and has enough space

-GEBERIT WALL HUNG TOILET INSTALLATION GUIDE -TOOLS NEEDED: level, tape measure, drill, screwdriver, hammer, saw -MATERIALS NEEDED: screws, anchors, geberit toilet, wax ring

  • If you are not sure, take measurements of the space to find out
  • Purchase a wall hung toilet and all necessary mounting hardware
  • Check that you have enough space in your bathroom for a wall hung toilet

-check the dimensions of the toilet against the dimensions of the hole in the wall -use a level to ensure the toilet is plumb -apply a bead of caulk around the flange on the wall -set the toilet on the flange and tighten the bolts -connect the water supply and test for leaks

Frequently Asked Questions

How Do You Assemble Geberit?

To assemble Geberit, one must first open the packaging and remove all of the pieces from the box. The pieces that are included in the assembly are the frame, cover, flushing mechanism, supply pipe, and mounting plate. The frame is then attached to the wall with the screws that are provided. The cover is then placed on top of the frame and secured in place with screws. The flushing mechanism is then connected to the supply pipe and the mounting plate is attached to the back of the toilet.

How Do You Fit A Geberit Concealed Cistern?

The Geberit concealed cistern is designed to be installed in a wall behind a toilet. The cistern is mounted to the wall with concealed brackets and connected to the toilet by a flexible supply pipe.

How Do You Mount A Geberit Wall Hung Toilet?

To mount a Geberit wall hung toilet, you will need to first find the studs in the wall and mark them. Next, you will need to cut a hole in the wall that is the same size as the toilet base. You will then install the mounting plate and attach the toilet to the mounting plate.

To Summarize

Wall hung toilets are a great way to save space in your bathroom. They are easy to install and can be tricky to get the hang of at first. But with a little practice, you’ll be able to install your wall hung toilet like a pro!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *