How To Install Hardie Shake Siding

Installing hardie shake siding is a relatively easy process that can be completed in a weekend. The first step is to measure the height and width of the house, and then purchase enough shakes to cover the surface. The next step is to remove the old siding and any trim pieces. If there is any insulation present, it should be removed as well. The shakes can then be nailed or screwed into place, starting at the bottom and working up. Trim

How To Install Hardie Shake Siding

Installation of Hardie Shake siding is a fairly simple process. First, the area to be covered should be cleared and all debris removed. The siding should then be cut to size using a circular saw or jigsaw. The shake siding can then be nailed in place using roofing nails.

-Hammer -Pry bar -Circular saw -Chop saw -Jigsaw -Tape measure -Level -Speed square -High quality exterior grade adhesive, such as Liquid Nails -Staple gun and 1/4″ staples -Paintable caulk -Paintbrush -Paint roller -Drop cloths -Ladder

  • Purchase hardie shake
  • Measure the height and width of the wall to be covered
  • If you are installing hardie shake siding over an existing wall, first make sure the wall is in good condition and properly prepared

– Hardie shake siding is a type of cladding that is made from cement, sand, and cellulose fiber. – It is often used as an exterior finish for homes, as it is durable and weather resistant. – Installation of hardie shake siding can be done by a professional or by a DIY homeowner. – The most important factor in installing hardie shake siding is ensuring that the substrate is even and in good condition. – The panels can then


Frequently Asked Questions

Do You Leave A Gap When Installing Hardie Board?

It is recommended to leave a 1/8″ gap when installing Hardie board in order to avoid moisture damage.

Do You Caulk Seams In Hardie Board?

There is no right or wrong answer to this question as some homeowners choose to caulk the seams between Hardie board panels while others do not. Caulking the seams can help to create a watertight seal and prevent moisture from seeping into the cracks, but it is not always necessary. If you are unsure whether or not to caulk the seams, it is best to consult with a professional before proceeding.

Where Do You Caulk Hardie Board Siding?

Caulking is the process of filling the gaps between two solid surfaces with a material that will fill the gap and prevent moisture from entering. When caulking Hardie board siding, you should use a silicone-based caulk. You should also use a caulk gun to apply the caulk, and make sure to seal the joints completely.


To Review

Hardie shake siding is a popular choice for homeowners because it is both beautiful and durable. It is important to install hardie shake siding properly in order to ensure that it lasts for many years.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *