How To Install Insinkerator Hot Water Dispenser

Installing an InSinkErator hot water dispenser is a relatively simple process that can be completed in a matter of minutes. The following guide will outline the necessary steps involved in the installation process.

How To Install Insinkerator Hot Water Dispenser

To install an InSinkErator hot water dispenser, first find a place to install the unit. It should be installed near a sink and electrical outlet. The next step is to remove the existing faucet by unscrewing the mounting bolts with a wrench. Connect the water supply hoses to the new dispenser and tighten the hose connections with a wrench. The final step is to connect the electrical cord to an outlet and attach the cover.

One InSinkerator hot water dispenser One mounting bracket One faucet One 1/2-inch copper tubing One 3/8-inch compression tee One 3/8-inch by 1/2-inch compression adapter One water supply valve One flex connector kit One electrical outlet

  • Turn off water supply to the sink by rotating the valve handle clockwise
  • Unscrew the nut
  • Disconnect the faucet aerator from the faucet spout (most have a wingnut or screw on the bottom)

below -If your sink has a hole drilled in the countertop for a faucet, it is likely big enough to accommodate the InSinkErator Hot Water Dispenser -It is important to make sure that the hot water dispenser is installed with the proper water pressure otherwise it will not function correctly -The dispenser must be connected to an electrical outlet and a cold water supply -Once you have determined that you have the proper installation space and that you have all

Frequently Asked Questions

How Do I Connect My Insinkerator Hot Water Dispenser?

If you have an InSinkErator hot water dispenser, you will need to connect the water line to the faucet. The water line can be connected to either the cold or hot water line. The water line must be connected to a shutoff valve.

How Does Insinkerator Hot Water Dispenser Work?

InSinkErator hot water dispensers use a small electric pump to send heated water from the tank to the faucet. The pump is activated when the user presses a button on the faucet.

How Do You Remove An Insinkerator Instant Water Heater?

The InSinkErator instant water heater can be removed by unscrewing the water hoses from the unit and then unplugging it from the wall.

Taking Everything Into Account

Installing an InSinkErator hot water dispenser is a fairly simple process. The hardest part may be finding a spot to put the unit, as it does require some space. Once you have determined where the dispenser will go, remove the old faucet and install the new one according to the manufacturer’s directions. Then, hook up the water supply and test the unit.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *