How To Jack Up A House To Replace Rim Joist

If you are planning to replace a rim joist, the first step is to jack up the house. You will need to use a hydraulic jack or screw jack to lift the house. Once the house is lifted, you can remove the old rim joist and install a new one.

How To Jack Up A House To Replace Rim Joist

The first step in replacing a rim joist is to jack up the house. This can be done using hydraulic jacks or scissor jacks. If using hydraulic jacks, place them under the corners of the house and slowly pump them up until the house is high enough to replace the rim joist. If using scissor jacks, place them at least every 4 feet along the sides of the house. Once the house is raised, use a saw to cut through the

-a hydraulic jack -a sturdy beam or plank of wood at least 16 feet in length -4 sturdy wooden posts at least 8 feet in length -2 metal pipes at least 2 inches in diameter and 10 feet in length

  • Using appropriate tools, prop up the house at the corners to create a level surface
  • Replace the
  • Use a reciprocating saw to cut through the joist
  • Remove siding and trim around the area to be worked on

-Check the weight of the object to be lifted -Determine the jacking points and place jack stands under them -Use a hydraulic jack to lift the object -Monitor the object as it is being lifted

Frequently Asked Questions

How Do You Jack Up A House To Replace Floor Joists?

One way to jack up a house is to use hydraulic jacks. These are placed under the house and raised until the desired height is reached. Then, the floor joists can be replaced.

Do You Have To Jack Up A House To Replace Rim Joist?

You do not have to jack up a house to replace rim joist, but it is often recommended in order to provide easier access and avoid any potential damage.

How Much Does It Cost To Replace A Rim Joist?

Replacing a rim joist can cost anywhere from $500 to $1,500 depending on the size of the joist, the type of wood, and the amount of labor required.


Replacing a rim joist is a major project that should not be taken lightly. It is important to consult with a professional before starting any work. In order to jack up a house, the foundation must be stable and the correct tools must be used.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *