How To Lift A Clawfoot Tub

There is no one definitive way to lift a clawfoot tub. Some people use ropes or chains, others use levers or hydraulic jacks.

How To Lift A Clawfoot Tub

There are a few ways to lift a clawfoot tub. One way is to use a dolly or wheelbarrow. Another way is to use a sling. A sling can be made out of rope or chains. The sling should be placed under the tub and then lifted by two people.

-Tub lifter -2x4s -Plywood -Waterproof sealant -Carpenter’s level -Circular saw -Drill -1 inch hole saw -Jigsaw -Paint or stain

  • If the tub is empty, fill it with water to its normal level
  • Apply sealant to any cracks or leaks
  • Check for any leaks around the faucet and at the drain

-To lift a clawfoot tub, use a piece of wood or metal that is about two feet wide and four to six feet long. -Position the wood or metal so that it is perpendicular to the tub and parallel to the floor. -Lift the tub with the wood or metal and carry it to its new location.


Frequently Asked Questions

How Heavy Is A Clawfoot Tub?

A clawfoot tub typically weighs about 200 pounds.

How Do You Lift A Cast Iron Tub?

There are a few ways to lift a cast iron tub. One way is to use a cast iron tub lift. This device attaches to the tub and has a hydraulic lift that raises and lowers the tub. Another way to lift a cast iron tub is to use chains or ropes. These can be attached to the tub and lifted by two people.

How Do You Lift A Cast Iron Bath Upstairs?

The most common way to lift a cast iron bathtub is to use a pulley system. You will need two ropes and two sturdy posts. tie the ropes around the posts and make sure that they are secure. Lift the bathtub and place it in its new location.


In Summary

Lifting a clawfoot tub can be done with the help of a few friends. Have one person support the tub from underneath while the other people use their strength to lift it.

Leave a Comment

Your email address will not be published.