How To Move A Bathtub Drain In Concrete

If you are looking to move a bathtub drain in concrete, you will need to use a jackhammer to break up the concrete around the drain. Once the concrete is broken up, you can use a chisel and hammer to remove the drain. Be sure to wear safety goggles and gloves while working with concrete.

How To Move A Bathtub Drain In Concrete

There is no definitive answer to this question because it will depend on the condition of the concrete and the type of bathtub drain. In some cases, it may be possible to use a socket wrench to loosen the drain plug; in other cases, a drill with a hole saw may be necessary to cut through the concrete. If the concrete is very thick or if the drain is embedded in the concrete, it may be necessary to break up the concrete around the drain with a jackhammer or ch

-Bathtub drain -Chisel -Concrete saw -Hammer -Mason’s trowel -Pipe wrench -Sledgehammer -Tape measure

• Clean out the hole and surrounding area. insert the new drain and secure with screws
• Pry out the old drain with a crowbar
• Use a chisel and hammer to break up the concrete around the drain

-To move a bathtub drain in concrete, one must use a jackhammer to break up the concrete around the drain. -After the concrete is broken, a chisel can be used to remove any remaining pieces. -The new hole can then be drilled and the drain replaced.

Frequently Asked Questions

How Do You Move A Tub Drain On A Concrete Slab?

If you are trying to move a tub drain on a concrete slab, the best way to do it is to use a chisel and hammer. First, use the chisel to break the concrete around the drain. Then, use the hammer to hit the chisel and loosen the drain. Finally, use your hands to pull the drain out of the concrete.

How Do You Move A Bathtub Drain?

There are a few ways to move a bathtub drain. One way is to use a plunger to create suction and pull the drain out. Another way is to use a plumber’s snake to loosen the drain from the pipe.

How Hard Is It To Move A Tub Drain?

It can be hard to move a tub drain, depending on the type of drain. A pop-up drain is usually the easiest to move, while a stopper or trip lever can be more difficult.

In Summary

If you are moving a bathtub drain in concrete, you will need to use a chisel and a hammer to break up the concrete. You can then use a shovel to remove the pieces of concrete. Next, you can use a screwdriver to remove the screws that hold the drain in place. You can then replace the drain and screws.