Removing a jetted tub can be a daunting task. It is important to have the proper tools and knowledge before starting this project. Here are a few tips to help make the process a little bit easier.
How To Remove A Jetted Tub
Removing a jetted tub can be a daunting task. The first thing you need to do is find out if the tub is bolted down to the floor or if it is sitting on a platform. If it is bolted down, you will need to remove the bolts before you can take it out. If it is sitting on a platform, you can simply take it out by lifting it up and carrying it out. Once you have the tub out of the way, you will need
-A bucket or large container to catch water -Screwdriver -Channel Locks or Pliers -Towel -Wrench -Shop Vac
- turn off the water to the tub by turning off the appropriate valve. 2. disconnect the waterlines from the tub by unscrewing them. 3. drain the tub by opening the drain valve and allowing
-It is important that you have the right tools before you start removing a jetted tub. -You will need a screwdriver, socket wrench, and channel locks. -If the bolts are corroded, you will also need a hacksaw. -The first step is to remove the cover plate on the tub. -Next, remove the screws that hold the jets in place. -Once the jets are removed, you can then
Frequently Asked Questions
Can You Replace A Jetted Tub With A Regular Tub?
Adding a standard bathtub into a home that previously had a jetted tub may require some additional plumbing work, as the standard tub will likely be deeper than the jetted tub. However, this is generally a do-it-yourself project that can be completed with relative ease.
Can You Turn A Jetted Tub Into A Soaking Tub?
Yes, it is possible to turn a jetted tub into a soaking tub. One way to do this is by removing the jets and adding a filler panel.
How Much Does It Cost To Remove A Whirlpool Tub?
It can cost anywhere from $100 to $400 to remove a whirlpool tub, depending on the contractor you hire and the difficulty of the removal.
Removing a jetted tub can be a daunting task, but with the right tools and instructions it can be done. First, turn off the water and disconnect the tub from any water and electrical sources. Then, remove the faucet and spout. Next, use a breaker bar to break the bolts that secure the tub to the floor. If necessary, use a chisel and hammer to break any sealant that is holding the tub in place. Lift the tub out of its space and dispose of it according to your local waste regulations.