How To Remove Concrete Wedge Anchors

Concrete wedge anchors, also known as expansion anchors, are used to fasten objects to concrete. They work by expanding outward as they are driven into the concrete, gripping the surrounding material. When it is time to remove them, the process is relatively simple.

How To Remove Concrete Wedge Anchors

There are many ways to remove concrete wedge anchors, but the most common is with a hammer and chisel. The chisel should be inserted into the crack at the top of the anchor and then hit with a hammer until the anchor pops out. Another way to remove them is by using a drill bit that is slightly smaller than the anchor. The drill bit should be inserted into the anchor and then turned counterclockwise until it comes out.

-Wedge anchors -Concrete drill bit -Hammer -Chisel -Screwdriver -Socket wrench

  • Use a screwdriver to remove the screws
  • Use a chisel to pry off the anchors
  • Use a hammer to knock the wedge anchors out

below: – remove the wedge anchor from the hole by turning it counterclockwise – use a hammer and chisel to break off the protruding end of the anchor – if any concrete remains in the hole, use a drill to remove it


Frequently Asked Questions

Can Concrete Anchors Be Removed?

Yes, concrete anchors can be removed. However, the process of removal may be difficult and/or expensive, depending on the type of anchor and the condition of the concrete.

How Do You Remove Nail Anchors From Concrete?

There are a few ways to remove nail anchors from concrete. One way is to use a hammer and chisel to break the concrete around the anchor until it’s free. Another way is to use a drill and a chisel bit to drill into the anchor until it pops out.

How Do You Remove Hilti Nails From Concrete?

There are a few ways to remove Hilti nails from concrete. One way is to use a hacksaw to cut the nail off flush with the concrete. Another way is to use a hammer and chisel to break the head of the nail off so that it can be pulled out with pliers.


In Closing

Removing concrete wedge anchors can be a difficult process. The best way to remove them is by using a hammer and chisel. First, use the chisel to break the seal around the anchor. Next, use the hammer to strike the chisel until the anchor pops out of the concrete.

Leave a Comment

Your email address will not be published.