How To Remove Shower Drain Cover That Is Grouted In

Removing a shower drain cover that is grouted in can be a daunting task. The grout can be hard and brittle, making it difficult to remove without breaking the tile around it. Before starting, make sure you have the right tools for the job. You will need a screwdriver, hammer, chisel, and hack saw. 1. Use the screwdriver to remove the screws that hold the drain cover in place. 2. Hit the cover with the hammer

How To Remove Shower Drain Cover That Is Grouted In

Removing a shower drain cover that is grouted in can be a challenging task. The first step is to try and remove the grout around the drain cover with a grout saw or chisel. Be very careful not to damage the drain cover itself. Once the grout is removed, use a screwdriver or pliers to remove the screws that hold the drain cover in place. If the screws are corroded, you may need to use a hacksaw to cut them off

-Shower drain cover -Phillips head screwdriver -Needle nose pliers -Hack saw

  • Remove the grout from around the shower drain using a grout saw
  • Pry off shower drain cover using a hammer and chisel
  • Using a screwdriver, remove screws that hold shower drain cover in place

below -If the shower drain cover is grouted in, it will need to be chiseled out in order to remove it. -Be sure to wear a mask and goggles while chiseling the grout, as it can cause irritation to the lungs and eyes. -Once the grout is removed, the screws or bolts that are holding the shower drain cover in place can be accessed and removed. -The shower drain cover can then be removed from the drain.


Frequently Asked Questions

How Do You Remove A Sealed Shower Drain Cover?

The easiest way to remove a sealed shower drain cover is to use a screwdriver to pry it off.

How Do You Remove A Tile Insert Drain Cover?

There are a few ways to remove a tile insert drain cover. One way is to use a chisel and hammer to chip away at the grout around the drain cover until it’s loose. Another way is to use a screwdriver to pry up the edges of the drain cover until it’s loose.

How Do You Clean A Shower Drain That Can’T Be Removed?

There are a few ways to clean a shower drain that can’t be removed. One way is to pour a pot of boiling water down the drain to clear out any debris. Another way is to pour a cup of bleach down the drain and let it sit for an hour.


To Summarize

Removing a shower drain cover that is grouted in can be a difficult task. The most effective way to remove it is to use a hammer and chisel to break the grout around the drain cover. Once the grout is broken, the cover can be removed by prying it up with a screwdriver.

Leave a Comment

Your email address will not be published.