Removing thinset from fiberglass tub can be a daunting task. There are a few ways to approach this depending on the amount of thinset that is stuck to the fiberglass. If there is a small amount, it can be removed with a putty knife. For larger amounts, a chemical stripper may be necessary.
How To Remove Thinset From Fiberglass Tub
Removing thinset from fiberglass tub can be a daunting task. It is a good idea to use a scraper or razor to remove as much of the thinset as possible. Then, use a commercial cleaner specifically designed to remove thinset. If the commercial cleaner does not work, you can try using a muriatic acid diluted with water. Be sure to wear protective clothing and goggles when using this type of cleaner.
-Thinset remover -Scrub brush -Rags -Bucket -Water
- Use a degreaser to clean the surface of the fiberglass tub
- Rinse the tub with water to remove any remaining debris
- Use a wire brush to scrub the thinset off of the fiberglass tub
-Thinset can be difficult to remove from fiberglass tubs, and may require the use of a chemical stripper. -Make sure to test the stripper in an inconspicuous area to ensure it will not damage the finish of the tub. -Scrub the thinset with a stiff brush, then rinse with warm water. -Repeat as needed until all of the thinset is removed.
Frequently Asked Questions
How Do You Remove Hardened Thinset?
Removing hardened thinset can be tricky. First, try using a chisel or hammer to break it up into smaller pieces. Once it is in smaller pieces, you can try using a scraper or wire brush to remove it. If that doesn’t work, you can try using a chemical stripper.
Will Vinegar Dissolve Thinset?
No, vinegar will not dissolve thinset.
How Do You Get Thinset Off Shower Base?
There are a few ways to get thin set off a shower base. One way is to use a razor blade to scrape it off. Another way is to use a chemical stripper.
Removing thinset from fiberglass tub is a difficult task. The best way to remove it is to use a commercial remover or a strong detergent.