How To Replace Moen Faucet Cartridge 1224 B

Moen faucet cartridge 1224 B is a type of cartridge used in Moen faucets. It is a quarter-turn cartridge and has a plastic body. This cartridge is used in many Moen faucets, including the Aberdeen, Brantford, Chateau, Fairfax, Kingsley, and Monticello collections. If your cartridge needs to be replaced, you can do so by following these simple steps.

How To Replace Moen Faucet Cartridge 1224 B

Moen faucet cartridge 1224 b is a part of the faucet that helps to control the water flow. If it is damaged or worn out, it needs to be replaced in order to ensure efficient water flow. Here is a guide on how to replace moen faucet cartridge 1224 b: 1. Turn off the water supply to the faucet by turning the valve off. 2. Open the faucet to release any pressure in

-Teflon tape -Channel locks -Wrench -Cartridge puller

  • Turn off water supply to faucet by turning off knob on the wall
  • Remove the bonnet nut by using a wrench and
  • Unscrew the handle from the faucet by turning it counterclockwise

below -If your Moen faucet is leaking from the spout, it may be due to a faulty cartridge. -To replace the cartridge, first turn off the water supply to the faucet. -Next, remove the handle by unscrewing it counterclockwise. -Then use a wrench to remove the cartridge. -Insert the new cartridge and reattach the handle. -Turn on the water and check for leaks


Frequently Asked Questions

How Do You Remove A Stuck Moen 1224B Cartridge?

There are a few ways to remove a stuck Moen 1224B cartridge. One way is to use a screwdriver to pry it out. Another way is to use a crescent wrench to turn it counterclockwise.

How Do You Remove A Moen Faucet Cartridge?

There are a few ways that you can remove a Moen faucet cartridge. One way is to use a wrench to loosen the cartridge. Another way is to use a screwdriver to remove the cartridge.

How Do You Change A Moen 1224 Cartridge?

Replacing a Moen 1224 cartridge is a relatively easy task that can be completed in about 10 minutes. First, turn off the water to the faucet at the shutoff valves underneath it. Then, use a basin wrench to remove the old cartridge. Apply plumber’s grease to the new cartridge, and insert it into the faucet. Turn on the water and check for leaks.


Wrap-Up

Replacing a Moen faucet cartridge is a relatively easy task that can be completed in about 10 minutes. First, remove the handle of the faucet by unscrewing it counterclockwise. Next, use a wrench to loosen the cartridge by turning it counterclockwise. Finally, pull the cartridge out and replace it with a new one.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *