If you are experiencing problems with your Milwaukee M18 battery, you may need to reset it. To do this, remove the battery from the tool and disconnect the charger. Hold down the power button on the battery for five seconds, then reconnect the charger and put the battery back in the tool.
How To Reset Milwaukee M18 Battery
There are a few ways to reset a Milwaukee M18 battery. One way is to use the built-in reset button on the battery. Another way is to use the Milwaukee Battery Charger to reset the battery. The last way is to remove the battery from the tool and then remove the black reset sticker on the bottom of the battery. After removing the sticker, place the battery back in the tool and turn it on.
-Milwaukee M18 battery -Drill -Socket wrench -Pry bar -Hammer
- Ensure that the battery is in the correct position
- Push the red button on the battery until it clicks
- Release the button and wait for the light to turn green
- Insert the battery into the tool
-Battery is completely drained -Remove the battery from the tool -Make sure the battery connectors are clean and free of debris -Insert the battery into the tool with the connectors facing down -Push and hold the black power button on the tool for 3 seconds -Release the button and wait for the green light to come on
Frequently Asked Questions
How Do You Fix A Milwaukee Battery That Won’T Charge?
There are a few things you can try if your Milwaukee battery won’t charge. First, make sure the battery is properly inserted into the charger. If it is not properly inserted, the charger will not recognize that there is a battery to charge. Second, check to make sure that the charger is plugged in and turned on. If it is plugged in and turned on, but the light on the charger does not turn green, then the battery may be defective and need to be replaced. Finally, if everything appears to be correct, you may need to replace the charger.
Can Milwaukee Batteries Be Fixed?
Milwaukee batteries cannot be fixed.
How Do I Fix My 12 Volt Milwaukee Battery?
Some people have reported success in bringing a 12 volt Milwaukee battery back to life by baking it in an oven. Others have had success with a battery charger.
Milwaukee M18 battery can be reset by removing the battery pack from the tool and pressing the red “Reset” button on the battery for five seconds.