How To Reset Sump Pump

If you have a sump pump in your home, it’s important to know how to reset it in case it stops working. The process for resetting a sump pump is fairly simple and can be done in a few easy steps.

How To Reset Sump Pump

If your sump pump is not working, it may be time to reset it. This is a process that is relatively easy to do, and only takes a few minutes. To reset a sump pump, you will need to locate the breaker box for your home. Once you have found the breaker box, you will need to locate the breaker for your sump pump. Resetting the breaker is as simple as flipping it off and then back on again. It is

-Sump pump -Hose -Tape -Newspaper -Pipe insulation -Screwdriver -Socket set -Wrench

  • Find the float switch on the pump and pull it up to reset the pump
  • Flip the circuit breaker back on and
  • Locate the breaker box for your home and switch off the circuit breaker for the sump pump

below -Check the float switch to make sure it is not stuck -Remove any debris from the pump or intake pipe -Ensure the pump is plugged in and that there is power to it -Turn off the pump at the breaker box -Remove the cover of the pump -Push the reset button on the pump


Frequently Asked Questions

Why Is My Sump Pump Not Working?

There are a few reasons why your sump pump might not be working. It could be that the pump is clogged or that there is no power to it. It’s also possible that the float switch is stuck in the “on” position, preventing the pump from shutting off.

Is There A Way To Reset A Sump Pump?

There is not a specific way to reset a sump pump, but there are some things you can try. If the pump is not working at all, check to see if it is unplugged or if there is a power outage. If it is plugged in and there is power, the next step would be to check the breaker box to see if the circuit has been tripped. If it has been tripped, reset the breaker and see if the pump starts working. If it still does not work, you may need to call a professional to troubleshoot the issue.

What Are Common Sump Pump Problems?

Sump pumps are prone to a number of problems, including clogs, pump failures, and float switch malfunctions. In addition, sump pumps can become ineffective during power outages or when the surrounding soil is waterlogged.


To Summarize

If you have a pedestal-style or submersible pump, and it begins to overflow or make noise, the first step is to find the reset button. For pedestal pumps, you will likely find it on the side of the motor. For submersible pumps, it will be near the top of the motor. Push the button and wait for the pump to reset. If the pump does not reset, turn off the power to the pump at the breaker box and call a professional.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *