How To Spray Polycrylic

Spray polycrylic is a clear finish that is typically used on wood surfaces. It is durable and dries quickly, making it a good choice for project that need to be completed quickly. When spraying polycrylic, it is important to use light, even strokes and to maintain a consistent distance from the surface. It is also important to allow each coat to dry completely before applying the next.

4 Steps to Spray Polycrylic

There are a few key things to remember when spraying polycrylic: first, always thin the polycrylic before spraying it. This will help ensure an even coat and avoid any drips or runs. Second, use a light hand when spraying, as too much polycrylic can cause bubbles or streaks. Finally, be sure to let the polycrylic dry completely between coats for best results.

Spraying polycrylic is an important skill to learn for a number of reasons. First, it can help you create a beautiful, smooth finish on your woodworking projects. Second, it can protect your projects from damage caused by water, heat, and other elements. Third, it can extend the life of your projects by providing a protective barrier against the elements.

Step 1: Spray Polycrylic Is A Clear, Protective Finish For Wood

Spray polycrylic is a clear, protective finish for wood. It is easy to apply and dries quickly. You can apply it with a brush, roller, or sprayer.

Step 2: It Can Be Used On Furniture, Floors, And Other Wood Surfaces

To spray polycrylic, first shake the can well and then hold it upright about 12 inches from the surface you’re going to spray. Press down on the nozzle to release the polycrylic and then move your arm in a steady back-and-forth motion to evenly coat the surface. Let the polycrylic dry for at least 2 hours before using the furniture or floor.

Step 3: Spraying Is The Most Common Way To Apply Polycrylic, But It Can Also Be Brushed On

Polycrylic can be sprayed onto a surface using a paint sprayer for quick and even coverage. Be sure to use a primer before spraying polycrylic, and always follow the manufacturer’s instructions for best results. When using a paint sprayer, always hold the nozzle about 10-12 inches from the surface to be sprayed.

Step 4: A Coat Of Polycrylic Should Be Applied Every Few Months To Maintain Protection

To spray polycrylic, first shake the can well and then hold it 8-10 inches away from the surface you’re spraying. Next, move the can in a back and forth motion while overlapping each stroke. Apply a thin, even coat and then let it dry for 2-4 hours before applying a second coat.

Frequently Asked Questions

Should I Spray Or Brush Polycrylic?

You can do either, but spraying is faster.

How Do I Get A Smooth Finish With Polycrylic?

Thoroughly sand the surface you’re going to finish with Polycrylic, apply a thin layer with a foam brush, and then sand again with a very fine grit sandpaper. If you want an even smoother finish, you can repeat this process.

Can I Spray Polycrylic?

Yes, you can spray Polycrylic, but you will need to thin it first.


Spraying polycrylic is a great way to finish your project and add a layer of protection. Make sure to shake the can well and spray in even strokes. Start in a small area and work your way out.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *