How To Store Lumber Outside

Lumber should be stored outside in an area that is dry and well-ventilated. The lumber should be stacked off the ground on supports such as saw horses, pallets, or blocks. It is important to space the lumber properly so that air can circulate around each piece.

How To Store Lumber Outside

Lumber can be stored outside by stacking it horizontally and securing it with stakes. The lumber should be spaced far enough apart so that air can circulate, and the ends should be covered to protect them from the weather.

-Tape measure -Plywood or OSB boards -Circular saw -High-grit sandpaper -Stain or sealant -Lumber screws -Drill -3 inch hole saw

  • Make sure lumber is dry before storage
  • Store lumber in an open area away from direct sunlight and rain
  • Store lumber on a level surface and off the ground

-Lumber should be stored in a dry location -Lumber should be stored off the ground -Lumber should be covered or wrapped to protect it from the elements

Frequently Asked Questions

How Do You Store Extra Lumber Outside?

One option for storing extra lumber outdoors is to stack it in a perpendicular fashion, with the ends of each piece resting on top of two other pieces. This will create a stable structure that can be covered with a tarp or roof to protect the lumber from the elements.

Should Lumber Be Stored Vertically Or Horizontally?

Vertical storage is better because the lumber will not be as likely to become twisted or warped.

How Long Can Lumber Be Stored?

Lumber can be stored in a dry, well-ventilated area for years as long as it is free of insects and decay.

To Review

Ideally, lumber should be stored indoors in a climate-controlled environment. However, if this is not possible, then the lumber should be stored in a covered area that is well-ventilated and away from direct sunlight.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *