How To Turn A Toilet 90 Degrees
There are a few ways to turn a toilet 90 degrees. One way is to use a plumbing wrench and turn the bolts on the bottom of the toilet that hold it in place. Another way is to cut the bolts off with a hacksaw and then use a pipe wrench to turn the toilet.
How To Turn A Toilet 90 Degrees
There is no one definitive way to turn a toilet 90 degrees. Some methods include using a plumbing snake to clear the line, or breaking through the toilet’s porcelain with a hammer and chisel. Another option is to cut the bolts on the tank with a hacksaw and break the tank free. Once the tank is free, use a rope to lift it over to the new position and reattach it.
-Toilet -Tape measure -Level -Pipe cutter -Pipe wrench -Hacksaw -File -Grinder
- Turn off water supply to toilet
- Remove screws that attach toilet to floor push toilet towards one side of bathroom cut supply line at
- Detach supply line from toilet
- Flush toilet to remove all water
Toilet flanges are usually round, so in order to turn a toilet 90 degrees, you will need to purchase an offset flange. The offset flange will have a longer neck that will reach the existing hole in the floor, and will allow you to rotate the toilet without having to cut into the floor.
Frequently Asked Questions
How Easy Is It To Rotate A Toilet?
It is relatively easy to rotate a toilet, as long as the bolts that secure the toilet to the floor are loosened.
How Much Does It Cost To Move A Toilet Over A Few Inches?
It can cost between $200 and $2000 to move a toilet, depending on the distance it needs to be moved, the type of toilet, and the labor involved.
Is It Expensive To Relocate A Toilet?
Yes, it can be expensive to relocate a toilet, depending on the scope of the project. Factors that can affect the cost include the distance of the new location from the existing plumbing, whether or not a new septic system is required, and any necessary permits or special inspections.
To Review
There is no one definitive way to turn a toilet 90 degrees. Some methods include using a wrench to turn the water supply valve off, disconnecting the water supply line, and disconnecting the drainage line. Another method is to use a saw to cut the toilet off at the base and then reattach it to the new wall.
