How To Unclog A Sump Pump

A sump pump is a device used to remove water that has accumulated in a sump basin, often found in the basement of a home. The water is pumped out and away from the building to protect it from flooding. If your sump pump stops working, the water can quickly rise and cause damage to your home. In this article, we will show you how to unclog a sump pump.

How To Unclog A Sump Pump

The first step in unclogging a sump pump is to determine if the pump is actually clogged. To do this, pour a bucket of water into the sump pit and watch to see if the water is pumped out of the pit. If the water is not pumped out, the pump is clogged and needs to be cleared. The next step is to clear the clog. This can be done by pouring a bucket of water into the sump pit and then

Tools: -Bucket -Wrench -Hacksaw -Pipe wrench -Tape measure -Pipe cleaner Materials: -Sump pump -Pipe – PVC glue

  • Unplug the pump from the electrical outlet
  • Look for the discharge pipe coming out of the pump. it is usually a
  • Check that the power is off to the pump by flipping the breaker off and then on again

If you are experiencing difficulties with your sump pump, there are a few things that you can do to try and unclog it. The first thing that you should do is check to see if the pump is getting power. If it is not, then you will need to troubleshoot the electrical system. If the pump is getting power, then you should check to see if it is clogged. You can do this by removing the lid and looking inside. If you see that

Frequently Asked Questions

Can A Submersible Pump Get Clogged?

Yes, a submersible pump can get clogged. This is typically caused by debris or sediment in the water that the pump is drawing up. If the pump becomes clogged, it will not be able to operate correctly and may even damage the pump.

How Do You Unclog A Submersible Pump?

If the pump is clogged with debris, the simplest way to clear it is to remove the debris by hand. If the pump is in a flooded basement, use a wet/dry vacuum to suck out the water and debris. If these methods do not work, the impeller may need to be removed and cleaned.

Why Is My Submersible Pump Not Pumping?

There could be a number of reasons why your submersible pump is not pumping. The pump could be clogged, the power could be off, there could be a problem with the wiring, or the pump itself could be defective. If you are not sure what is causing the problem, it is best to call a professional to troubleshoot and fix the issue.


If your sump pump is clogged, the first thing you should do is unplug it. This will prevent it from running and potentially causing further damage. Next, you’ll need to pour a bucket of water into the sump pump to dislodge the blockage. Once the water has been released, you can plug the pump back in and it should function properly. If the blockage is still present, you may need to use a plunger to dislodge it.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *