How To Use Lye To Unclog Drain

Lye can be used to unclog a drain by creating a chemical reaction that breaks down the clog. Lye is available at most hardware stores, and can be safely used to clear most clogs.

How To Use Lye To Unclog Drain

Lye is a caustic agent that is often used to unclog drains. It can be purchased at most hardware stores. To use lye to unclog a drain, pour it into the drain and let it sit for a few minutes. Then, pour hot water down the drain to flush it out.

-To unclog a drain, you will need: -A bucket -A pot or saucepan -Lye -Water -A plunger -Rubber gloves -Eye protection

  • Place a pot of water on the stove to boil
  • Quickly pour the boiling water down the drain after the lye
  • Flush with cold water
  • Pour 1/2 cup of lye into the drain

1. Lye is a very strong base that can be used to unclog drains. 2. It is important to follow the safety instructions when using lye, as it can be dangerous if not used correctly. 3. To use lye to unclog a drain, pour it down the drain and let it work for a few minutes. 4. Then, flush the drain with hot water to clear away the lye and any clogs.


Frequently Asked Questions

Can You Put Lye Down The Drain?

Lye is a highly corrosive substance that can damage your plumbing. It is best to avoid putting lye down the drain.

How Long Does It Take Lye To Work In A Drain?

Lye can work relatively quickly in a drain, depending on the concentration of the lye and the size of the clog. In general, however, it can take several hours for lye to fully dissolve a clog.

How Long Does It Take Lye To Unclog A Drain?

Lye is a strong alkali and can quickly dissolve greases and other organic materials in clogged drains. However, it can also cause damage to pipes if used in high concentrations or for extended periods of time. In most cases, lye can dissolve clogs within minutes. However, if the clog is particularly stubborn, it may take several hours or even a day or two for the lye to break it down completely.


In Summary

If you are experiencing a clogged drain, one of the quickest and easiest ways to clear it is by using lye. Lye is a strong base that can dissolve organic material, such as hair and grease, that is blocking the drain. To clear a clogged drain with lye, pour 1/2 cup of lye crystals down the drain, then follow with 1 gallon of boiling water. Let the solution sit for 30 minutes, then flush with cold water.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *